Heat Press HTV (Heat Transfer Vinyl) Application

Hot peel: Peel carrier film while warm, faster process, works on standard vinyl. Cold peel: Peel after cooling, better for metallics/glitter, adhesive sets fully before peeling.

Temperature too low, pressure too light, or insufficient dwell time. Repress at higher temp (+10°F), increase pressure 5 PSI, or add 3 more seconds. Always cure 24 hours before washing.

Yes, but use lower temperature (290-300°F) to prevent glossiness or melting. Polyester responds well to HTV but requires precise temp control.

Press first color, cool completely, then position second color overlapping first by 1-2mm. Press at same settings. Layers add visual interest but can cause stiffness if too thick.

Adhesive bleeding or improper pressure. Use firm, even pressure, reduce dwell time by 1-2 seconds, or lower temperature slightly. Clean with damp cloth if it occurs.

Yes, but light colors show heat shine more than dark colors. Use lowest recommended temperature and check for glossiness before full production run.